5 Ways to avoid UPS Battery Failure

Are you fed up with your UPS system failing? 

You don’t want to be stuck with a dead UPS when you need it the most.

UPS battery are a vital part of any UPS system. They’re the “heart” of the UPS because they take care of all the power conversion and transfer that’s needed for backing up your critical systems.

There are many different threats to computers, but the most common is power. This is because the majority of computer work is done with electricity. A UPS protects your computer from surges and power fluctuations.

Moreover, it also helps extend battery life when you’re on the go.

The UPS battery is responsible for keeping your home or office running when the power goes out.

If the UPS battery fails, then the unit will shut down, rendering all connected equipment useless.

Short power losses are not a problem for most UPSs because they have enough stored energy to satisfactorily handle any minor power failures. However, if your system does not contain batteries or has insufficient capacity to store these power fluctuations, it will eventually fail.

Here are 5 things to avoid when it comes to your UPS battery.

1- Avoid exposure to extreme temperatures such as high heat or freezing conditions

We all want to avoid extreme temperatures when it comes to our electronics. However, UPS batteries are particularly sensitive to high heat and freezing conditions. So what’s the deal with UPS batteries?

UPS batteries are made up of cells that contain lead-acid plates. When these plates are exposed to extremes in temperature, they can produce gas which will lead to an explosion.

UPS units are designed to be operated with normal indoor temperatures (15°C/59°F to 25°C/77°F). Exposure to extreme temperatures can damage the battery and reduce its expected lifetime.

Avoid exposing UPS batteries to extreme temperatures such as high heat or freezing conditions, which can result in shorter battery life.

UPS units should be operated in an environment of (15°C/59°F to 25°C/77°F), without exceeding the maximum ambient temperature of 35°C (95°F).

2- Cycle or charge your UPS batteries periodically. This will help them maintain their full capacity levels.

You should follow a few rules to ensure you get the most out of your UPS batteries. This will help them maintain their full capacity levels and make sure they don’t die prematurely.

First, cycle or charge your UPS batteries periodically.

This will ensure that the battery has a good mix of charge and discharge cycles, which prolongs battery life.

It also helps to balance the cells in each battery pack. Second, clean the terminals with a terminal cleaner at least once a month.

This will help remove any corrosion that may have built up from being discharged for extended periods of time.

Lastly, keep an eye on the electrolyte level in your battery cells to make sure they are full before you use them for power production.

3- Keep Detailed Records of Battery Maintenance 

To avoid UPS battery failure, keep detailed records of battery maintenance. A common cause of UPS batteries rapidly losing charge is a lack of power maintenance.

A lot of the time, people don’t think about checking on their UPS batteries until they need them, and then it’s too late.

The more you know about your UPS and its batteries, the better able you will be to anticipate an impending power outage.

When this inevitable event does come, you can rest assured that with properly maintained batteries you’ll have plenty of time to shut down your equipment and save your data before the power goes out.

4- Check with your company’s IT department or a qualified technician if you don’t know how to replace a battery.

If you’re not sure how to replace a UPS battery, don’t touch it. It’s important that you read the instructions carefully and understand what you need to do before attempting to replace the battery.

If you have any doubts, ask someone who knows what they’re doing or contact your company’s IT department.

Replacing a UPS battery is not difficult to do but it’s better not to take any risks. The UPS Battery is an important part of your system so it needs to be taken care of properly

5- If the UPS has a low battery warning light, check the system’s manual for instructions on how to charge the unit.

It might sound like a minor issue, but if your UPS has a low battery warning light, you need to address the problem.

If not, the unit will eventually stop running and turn off all your backup power. Your backup power can be critical to keeping your equipment running during a power outage.

5 steps you can take when you notice a low battery warning light.

1- Turn off all connected devices, including servers and computers.

2- Disconnect everything from the power strip connected to the UPS (this includes any power cords connected to the surge protector).

3- Unplug the power cord from the outlet.

4- Wait 30 seconds then plug back in everything that was disconnected from the power strip attached to the UPS.

5- Check if there’s a GREEN HIGH VOLTAGE LED lit up on the back of your UPS unit. If so, then go ahead and reconnect your devices as normal. However, if there is no green LED lit up on your device, please contact the expert.

Before you go: 

Your company’s power supply is one of its most critical systems.

UPS battery are an essential part of your company’s power supply. They are also one of the most expensive components to replace in your system.

That’s why it’s important to make sure they last as long as possible; it will save you money and time in the long run.     

If you’re not careful, UPS battery failure can be costly. 

If you have any questions regarding UPS Systems, please contact us using the information below OR fill out the form below and a member of our team will contact you.

Email us at

-Call on +91  9696086262022-40991100

-WhatsApp us by clicking here