Blogs

5 steps to Improve Power Usage Effectiveness of your Data Center.

Data Centers are a lifeline of your company.

We live in a world where data is everything. 

Power Usage : Successful businesses are the ones that have the most powerful data centers with the most innovative solutions for storing, managing, and analyzing data.

Data centers are expensive to maintain though, and they need to be as efficient as possible.

In this article, we will discuss how to improve the  effectiveness of your Data Center.

It is vital to the success of any Data Center.

Reducing power can cut your costs, increase your investment return on your power infrastructure, and improve the service quality that you provide.

The key to reducing  in your Data Center is to optimize the power distribution throughout the facility.

What is Power Usage Effectiveness?

It is a measurement of the efficiency of Data Center power distribution, which is the percentage of the total power delivered to the data center that is used for computation.

You can also think of PUE as being an indicator of how much electricity your data-center infrastructure is using in comparison to how much it’s producing.

This metric can help facilities managers pinpoint where energy efficiency problems are occurring.

Different types of data centers have different levels of PUEs.

For example, a large enterprise with its own direct connection to the grid will have significantly higher PUE than a small business that’s running on the electricity grid controlled by a local utility company

When the  (PUE) ratio of a data center is too high, it costs more for energy to power the building, which could lead to an increase in operating expenses.

A PUE that’s too high could also cause problems for other areas of your company.

For example, if you have an office that’s located near a data center with a PUE that’s too high, employees might not be able to concentrate due to noise from the facility.

The good news is there are ways you can improve the PUE ratio of your data center without costly renovations.

Here are 5 Steps to Improve your Data Center’s Power Usage Effectiveness.

1- Develop a Effectiveness (PUE) Improvement Plan of your Data Center

The PUE metric is a measure of data center efficiency.

The measurement is the ratio of the total amount of used by all IT equipment to the total  delivered to all IT equipment.

A PUE ratio of 1.00 means that all the energy delivered to the facility is being used effectively, with no energy wasted.

The lower, or more efficient, your PUE ratio, the better it is for your bottom line. It’s important that you take care in designing your data center, but you can also make improvements during operation. 

2- Isolate and Remove Hot air

Data Center management is a heavy responsibility.

Raising the (PUE) of your data center is one way to cut back on its negative environmental impact and save some money.

The PUE measures the efficiency of the data center by calculating how much energy is used by the servers versus how much is used for powering and cooling them at 100%.

Higher PUEs indicates that more energy is being wasted on cooling and powering, which can lead to higher utility bills or even an increase in greenhouse gases.

You can improve your Data Centers’ PUE with a few easy steps: 

1-Isolate and remove hot air from the Data Center. This will keep them cool and make them more efficient 

2-Use cold water for cooling systems 

3-Make sure your servers are configured correctly.

3- Monitor power consumption and take corrective action when necessary.

One of the biggest headaches for today’s Data Center is power consumption. To avoid costly over-provisioning, it is critical to monitor and take corrective action when necessary. 

Monitoring can be done by using a Data Center Power Monitoring System or through hardware that monitors the current and voltage coming into your facility.

By monitoring this information, you can make adjustments in order to save energy and money, while also improving the sustainability of your company.

4- Modify your data center’s design 

It is important to plan for how the will be used in your data center, where the data center is located, and all of its components.

With a little planning, you can improve the effectiveness of your data center.

The location of your data center can have a major impact on the  effectiveness.

If you are operating in an area where the climate is harsh, for example, you will need to have proper air conditioning to keep everything running smoothly.

You also want to make sure that your cables are organized in order to ensure that the is efficient.

5- Consider hosting your applications in the cloud

No matter how many servers, networks, and power units you have, they will eventually reach a point where they are overworked and inefficient.

At this point, the best course of action is to look at other ways to scale your business. One option is cloud hosting.

It’s a more affordable way to grow your company without the need for purchasing additional hardware or software. Cloud computing provides 

benefits, such as reducing the strain on your data center, which will increase the Power Usage Effectiveness (PUE) of your data center.

Before you go:

The Data Center is the brain of your company. They are integral to the operation of many businesses.

They provide the necessary infrastructure for an organization’s IT operations, including storage, servers, and networking.

Although data centers have a reputation for being energy-intensive facilities, they can be a smart investment in terms of power usage effectiveness (PUE).

To be successful in the data center, you must have a clear understanding of its effectiveness. 

And the only way to do that is to measure it. 

To learn more about Data Centers, contact us right now using any of the below information

-Email us at marketing@msplgroup.com

-Call on +91 96960 86262/ 022-40991100

-WhatsApp us by clicking here