How to Calculate Your UPS OR inverter Battery Backup
Do you have an emergency power backup system for your business?
Are you looking for a UPS or Inverter Battery Backup?
Technology has become a vital part of every company. It simplifies day-to-day tasks and can also help with efficiency and organization.
An Uninterruptible power supply system is a battery-powered, uninterruptible power source for your critical electronics when you need it the most. It automatically switches to battery when there’s a power outage, and then switches back when the electricity comes back on.
This is a great way to keep an uninterrupted stream of work going even in the face of disasters and outages – so you can focus on getting your work done.
An inverter is a device that changes DC (direct current) electricity into AC (alternating current) electricity that can be used by devices that require AC electricity, such as many types of lightbulbs and refrigerators.
When you don’t have access to AC electricity
Power and energy are the lifeblood of any organization. Without these two, your business will be at a standstill. To avoid this, you need to make sure you have a power backup system in place.
These systems also need to be able to provide your business with enough power for times when the main power is offline. That’s where a UPS and an inverter come in.
But before that let us know more about your equipment’s power needs
How many watts does your equipment consume?
Power consumption is the amount of power your computer or other electronic device uses to operate. This is generally measured in watts (W) or kilowatts (kW). UPS is short for an uninterruptible power supply. Most of the UPS systems provide battery backup.
When the main power source fails, the battery-powered UPS continues to supply power to protected equipment for a limited time. The battery backup time is calculated based on the total load, the size of the battery, and the amount of power it can provide.
How many watts does a battery consume?
UPS OR Inverter is mandatory for every business. Most businesses have a lot of computers, printers, servers, etc.
All of which require power and use a lot of energy. The power can be in the form of electricity, gas, steam, solar, etc.
To keep the power on for the business, you need a backup power source. A backup power source is an energy storage device that can provide energy to a load even when the primary energy source fails.
A battery backup is the most common backup power source for businesses and homes.
How many watts will be the power consumption of the battery after 1 hour?
An average UPS battery backup time is calculated by multiplying the continuous load in watts by the number of hours of backup. In many cases, the watts of the UPS system are already provided on the products label, which is why it is very important to read the label carefully. If you are not sure about the watts of your UPS, you can refer to the manufacturer’s website for the information.
Also, if you are looking for a UPS that will provide backup to your business computers, you will need to consider the number of computers you will be protected, how much they each consume in watts, and how many hours you want the battery to last.
What is the backup time of the battery?
Back-up time is the length of time that power will be provided by a UPS battery or inverter during a power outage. While this isn’t typically an issue, it can become one if your backup time is too short and your power goes out for longer than anticipated. To calculate your backup time, you need three pieces of information:
1-The size of the unit’s battery
2-The size of the load being run off of the UPS or inverter
3-The number of hours of operation needed.
Just like any other power system, UPS or inverter battery backup time will vary from one installation to the next. The most common factors that affect UPS or inverter battery backup time are; your load profile, the size of your batteries, and the manufacturer’s specifications for your specific inverter or UPS unit.
There are a few different ways to calculate how long your battery backup time will last. You can calculate it based on a percentage of the total battery capacity you have available
How to calculate the backup time of a UPS or an inverter with battery backup
Your UPS or inverter is a critical component of your business and it helps you to keep things running when the power goes out. But how long does your UPS or inverter run with a single battery charge? The following is a guide to help you calculate how long your UPS or inverter will run on a single battery charge.
Here’s how to Calculate the Backup Time of a UPS or an Inverter with Battery Backup
You can use the following simple formula:
Backup Time (in hours) = Battery Capacity (in Ah) X Input voltage (V) / Total Load (in Watts)
Let us assume that you have an inverter battery with 100 Ah of capacity and 12 V of input voltage. You want 2 Computers, 1 Printer, and 1 Wi-Fi router to run on that battery. So, what will be your UPS battery backup time, and how long will your appliances run in this specific case? Let’s find out.
Taking your inputs into consideration, you can calculate your total load, like:
2 Computer = 150 x 2 = 300 Watts
1 Printer = 80 x 1 = 80 Watts
1 Wi-Fi router = 1×20 Watts = 20 Watts
So, the total load in your case is 300 + 80 + 20 = 400 Watts.
Now, let us apply all these values in the above-said battery backup time formula.
Backup Time (in hours) = 100 x 12 / 400 = 3
So, your UPS battery will last around 3 hours to keep your IT Equipment running.
A business without a UPS or inverter will be at great risk, and this is because the UPS or inverter is the only thing that can protect your business against power outages.
The right UPS battery is the most important part of any UPS power protection system. The battery is one component that gets overlooked by many small business owners, but it is the most important part of the protection system.
In conclusion, it is not just enough to have a UPS or an inverter in your office; it should also be installed properly.
We hope you enjoyed our blog about why batteries fail and why UPS batteries are such a crucial part of your business. If you need more information, we recommend downloading our FREE handbook called “Why Batteries Fail” and also be sure to contact us for any questions you might have on UPS batteries.
Want to know more about
- What happens if you have batteries that are past their shelf life?
- Can you connect two UPS systems?
- What are the calculations needed to determine UPS battery needs?
To know more, feel free to contact us on the below-mentioned details OR you can fill out the form below and our team will get in touch with you.
-Email us at email@example.com
-Call on +91 96960 86262/ 022-40991100