BATTERY BACKUP UPS EASILY HANDLES ALL 7 POWER PROBLEMS

How about the power outage?

That’s when you need a battery backup system to ensure you don’t lose your data, or worse, go without power for days.

If your home is powered by electricity, you should be aware of the possibility of it being compromised. Most battery backup systems don’t tackle all the scenarios that could lead to a loss of power, leaving consumers without power at home. The right battery backup systems are built to handle all the scenarios you could possibly face.

The time has come to protect your electronic devices, computer, and home automation server with an energy efficient UPS battery backup solution.

What is a UPS battery backup?

The UPS battery backup is very important to keep in business. It allows you to store power so that you can access all the important data stored on your computer. This means that when the power goes out, you won’t lose any of your important data.

So, whether you are at home or in your office, you’ll be safe and secure when the power goes out.

A UPS battery backup system is not a difficult thing to install, and it is not expensive. 

The only thing that you have to worry about is ensuring that the UPS battery backup system will keep your data safe. Make sure that the UPS battery backup is properly connected to the power source. If you don’t, your power might go out and you’ll be unable to access your data.

How does it work?

This is a concept that’s easy to understand. Store Energy batteries can provide power to your computer or electronic device in the event of a power failure.

UPS systems come in three different types, each with a different working topology. The main types of UPS systems are Off-Line, Line-Interactive and On-Line.

1- Offline/Standby UPS

Offline UPS is also called Standby UPS or battery backup.  An offline UPS is best suited for homes, small offices, personal computers, and other less critical applications. During power cut-off, it gives enough backup to save your work and safely shut down the devices.

2- Line-interactive UPS

Line-Interactive UPS provides far better control over power fluctuations than Offline/ Standby UPS. Line Interactive system provides both battery backup and power conditioning.  This UPS is a protected UPS that is normally connected directly to incoming utility power.

3- Online/Double-Conversion UPS

Online UPS is the most expensive UPS of all three as it gives backup to critical equipment 24/7 where even a millisecond delay can cause huge loss.  Online UPS is the most common UPS for protecting large data centers, telecommunications, company servers, etc. by providing the highest level of power quality.

The Seven Power Problems

It’s easy to recognize the three most common power problems.  Voltage spikes, power outages, and brownouts are three of the most common problems that people face with electricity.

There are 7 electrical power problems. Each of these problems can be fixed with proper equipment and care.

1- Blackout 

Severe weather conditions are often to blame for a power failure.  Damage to electric transmission lines, fault at power stations, grid failures, and short circuits are some of the other factors that can cause a power outage. There is a difference between how much power is generated and how much is used. It can last for a few minutes, or it can last for days or weeks in a worst-case scenario.

2- Over Voltage

The normal values of the voltages that surpass them cause insulation damages to electrical appliances, which leads to a short circuit. It usually happens when the incoming voltage is higher than the standard level.

3- Under voltage

The appliances that are connected to the circuit are affected by under voltage.  Too long or insufficient wiring, overloading of the circuit, loose connections, and other factors can cause under voltage. Equipment’s reliability can be degraded by frequent Under voltage. The equipment won’t operate at its best if it’s not running on the rated voltage.

4- Frequency Variation

Frequency variation can happen when the generator level and power frequencies fluctuate more than usual. 

Data loss, system crashes, and critical equipment damage can all be caused by variation in Frequency. 

All generated power and other power sources should be evaluated, repaired, corrected, or replaced in order to solve the issue. When the generator is loaded it is more common for Frequency variation to occur.

5- Interruption

lightning strikes, weather, accidents, equipment failure, or a basic circuit trip are the causes of interruption.  It’s not a big deal if the power goes out in your house, but it is a big deal if the power goes out in hospitals, manufacturing factories and offices. Damage and downtime to everyone can be caused by an interruption. The data of a small business user can be lost due to interruptions.

6- Transients and Spikes

For a short period of time, these surges last.  Transients are caused by a sudden release of energy due to lightning strikes, arcs and the generator being switched on and off. If there is a spike or Transient, there is a chance that the equipment will hang and even suffer short damages.

7- Voltage Fluctuation

A voltage fluctuation is a systematic variation of a series of random voltage changes of small dimensions at a low-frequency level. Any load that has significant current variation can cause a change in voltages.

Why do you need a UPS in your home or business?

A UPS is a device that uses electricity to keep your computer on when there is a loss of power. In some situations, you may lose power for a longer period of time. During this time, the computer will shut down automatically.

However, when you are ready to use your computer again, you must turn it on manually.

A UPS allows you to do this. It has a battery that can store energy so that your computer is still powered on when power is lost.

You can also use a UPS to keep your computer running during an extended power outage. You can’t expect the computer to run forever if there is no electricity. In fact, the computer can even damage itself if it is left on for too long. To avoid any damage, use a UPS so that your computer can continue to run even when power is lost.

Which battery backup UPS handles all seven different types of power problems?

If you’re looking for a battery backup UPS system that can handle all seven different types of power problems, look no further than the APC Back- UPS Pro series.  This unit is capable of providing backup power for computers, networking equipment, medical devices, and more, making it a great option for all of your backup power needs. APC Back- UPS Pro can provide backup power for a variety of devices.

The APC Back- UPS Pro is a battery backup system that can handle all seven different types of battery backup needs.

Before you go:

If there is a power cut-off or failure, it can cause a lot of damage. It’s important to take care of your critical applications before problems occur.

When the power comes back on, a system that is not in use will be safe. It is possible that your system will fail or cause an issue if the power fails while you are working on it.

Uninterruptible Power Supply comes to your rescue when things happen. If you have a backup time, you can shut down your appliances and save time. It’s important to have a UPS at your office  or at home.

We’re here to help you with your Power needs.

Let us show you how we can provide the perfect solution for your business!

To learn more about Data Centers, UPS Systems contact us right now using any of the below information

–Email us at marketing@msplgroup.com

-Call on +91  9696086262 /  022-40991100

-WhatsApp us by clicking here